Owatrol Dilunett. Paint stripper

Paint and varnish stripper for up to 8 layers of paint. It is solvent-free and can be rinsed off with fresh water. Works on its own and can be applied to wood, plastic, stone, concrete and metal. DO NOT apply to aluminium!

Contents: 1L

Properties
Solvent-free gel without paraffin - non-flammable. Removes stain, wax, varnish, paint and antifouling. Makes the existing layer water-soluble (can be rinsed off with water). Efficient: removes up to 8 layers of paint at once. Easy to use: works on its own even in the most hard-to-reach places. Does not evaporate, does not dry out.

Use
Can be used on wood*, metal**, plastic, stone, cement ... Ideal for hard-to-reach places or parts with a lot of fretwork, both horizontally and vertically: doors, fences, enclosures … Especially suitable for stripping large surfaces: does not evaporate, does not dry out and remains active for a long time. Does not attack plastics, rubber, synthetic fillers or gelcoats.
* except oak, chestnut and inlaid wood
** except aluminium

Processing advice
Always perform a test first. Wear rubber gloves and use a nylon brush or a glue brush. The working time can vary from a few minutes to several hours, depending on the type of product (alkyd or acrylic) and the number of layers. Check the action of the product with a putty knife. On an absorbent surface, the stripper must always be neutralized.

Application
Apply a thick layer of DILUNETT over the entire surface to be treated. Allow the product to work. If the product dries, lightly spray with water to reactivate it. Rinse off with clean water and a brush or with a high-pressure cleaner (max. 60 bar). NB: the product is easier to remove with warm water. After use on wood, always apply NET-TROL (to the wet wood) IMMEDIATELY after DILUNETT has been rinsed off. Consult the instructions for use on the packaging.