Epifanes Interim Coat / 750 g

A two-component primer / intermediate coat based on epoxy and vinyl resins. Good adhesion properties and impact resistance. Universally overcoatable with all types of one- and two-component paint products. Because Epifanes Interimcoat contains quartz, it has a rough surface with excellent mechanical adhesion for the subsequent layers, therefore do not sand Epifanes Interimcoat.

Description: A two-component primer / intermediate coat based on epoxy and vinyl resins. Good adhesion properties and impact resistance. Universally overcoatable with all types of one- and two-component paint products. Because Epifanes Interimcoat contains quartz, it has a rough surface with excellent mechanical adhesion for the subsequent layers, therefore do not sand Epifanes Interimcoat. Application: General adhesion layer for indoor and outdoor use, below and above the waterline. Adhesion layer for various antifoulings regardless of brand, on polyester and two-component (epoxy) substrates. Final adhesion layer over epoxy systems. Brush application: Epifanes D-601 Thinner Spray application: Epifanes D-601 Thinner Pot life at 20°C: 1 hour Advice: Before this product is overcoated, first clean the Interimcoat with Epifanes 1-C Spray Thinner, white spirit or water and ammonia to remove hardener residues from the surface. Then allow to evaporate thoroughly. Overcoatable: After 4 hours at 18°C: two-component epoxy products After 24 hours at 18°C: antifoulings and topcoats Unlimited maximum Overcoatable with: Above/below the waterline: all two-component epoxy products Below the waterline: all types of antifouling Coverage: 8 m2/l @ 35 microns Recommended dry film thickness: 35 microns Mixing ratio by volume: 86 parts base (A) : 14 parts hardener (B) Mixing ratio by weight: 90 parts base (A) : 10 parts hardener (B) Colors: white